PJRC.COM Offline Archive, February 07, 2004
Visit this page on the live site

skip navigational linksPJRC
Shopping Cart Checkout Shipping Cost Download Website
Home MP3 Player 8051 Tools All Projects PJRC Store Site Map
You are here: MP3 Player Technical Docs Kit Assembly, Rev A Step 1 Search PJRC

PJRC Store
Main Board, $150
LCD & Pushbuttons, $42
LCD/Backlight/PB, $77
IDE Cable, $9
Complete Parts List
MP3 Player
Main Page
Detailed Info
User Photo Gallery
Connecting The Board
Firmware Download
Side Projects
Technical Docs
Freq. Asked Questions
FAQ #2
News And Updates

MP3 Player Kit, Assembly Instructions

These eleven assembly diagrams are also available as high resolution TIFF files.

Step 1, Solder Surface Mount ICs

Parts Placement Illustration, Step 1

Step 1, Component List

QuantityColorComponents
1.STA013 MP3 Decoder IC, 32 pin SOP Package
1.CS4334 24 Bit Digital to Analog Converter IC
1not shownMAX810-3.0, SOT-23 Package

Step 1, Notes

These SOIC surface mount chips should be soldered before any of the nearby through-hole components are added. The nearby parts can obstruct your access to these tiny pins, making it much more difficult to properly solder these parts.

Step 1, MAX810, Solder Side

The MAX810 chip is surface mount soldered to the solder side (bottom) of the board. It is located under the center of the 87C52 chip.

close up photo showing MAX810 soldered


MP3 Player Kit, Assembly Instructions, Paul Stoffregen.
http://www.pjrc.com/tech/mp3/step01.html
Last updated: November 28, 2003
Questions, Comments?? <paul@pjrc.com>