Shopping Cart Checkout Shipping Cost Download Website

Home

MP3 Player

8051 Tools

All Projects

PJRC Store

Site Map

You are here: Audio Power Amp Main Page

Search PJRC

Audio Power Amp Main Page

Audio Power Amp

Someday, I'll do some substantial testing to determine exactly what the power output is, and create some more detailed pages about how to build this amplifier.

Update: the input transistor are 2N5210, not 2N2510 as shown above

Transistor	Color
2N5210	Blue
MPSA56	Pink
MPSA06	Yellow
2N3904	Green
2N3906	White

These color parts placement diagrams are also available in as postscript files in a ZIP archive.

This parts list is under construction... I'm gathering part info for several lists, so pleast don't assume this list is totally correct or complete.

Qty	Vendor	Part #	Description
1	Newark	58F508	Wakefield 421k Heatsink
2	Mouser	567-7-373-BA	Low-Power TO-220 heatsink
3	Mouser	592-2N5210	Low Noise NPN, TO-92
1	Mouser	161-4215	Phono Jack, 90 deg PCB mount
1	Mouser	592-MPSA06	Medium Power NPN, TO-92
1	Mouser	592-MPSA56	Medium Power PNP, TO-92
1	Mouser	511-TIP29C	Power NPN, TO-220
1	Mouser	511-TIP30C	Power PNP, TO-220
1	Mouser	511-TIP33C	High Power NPN, TO-218
1	Mouser	511-TIP34C	High Power PNP, TO-218
2	??	2N3904	General Purpose NPN
1	??	2N3906	General Purpose PNP
2	Mouser	583-1N4742A	12V Zener Diode
5	Mouser	592-1N4148	Small Signal Diode
3	Mouser	583-1N4001	1A (slow) rectifier diode
6	Mouser	140-XLR16V100	16V 100uF Capacitor (radial)
1	Mouser	140-CD50N6-331K	330pF NPO Capacitor
1	Mouser	141-100N5-051J	51 pF NPO Capacitor
6	Mouser	140-PF2A104K	0.1uF Mylar film capacitor
2	Mouser	28PR002-0.3	3 Watt 0.3 Ohm Power resistor
1	Mouser	594-63P502	5K Top adjust cermet trim pot
2	Mouser	29SJ500-2.2K	2.2K 1/2 Watt Carbon Resistor
1/2	Injectorall	PC18P	4x6 board
5			1/2 inch 4-40 machine screw
5			4-40 nut
5			4-40 lockwasher
2			Shoulder Washer
2			Insulator, TO-218 size
1			Cable Clamp
2			Red Wire, 18 AWG
1			Yellow Wire, 18 AWG
1			Orange Wire, 22 AWG
2			Blue Wire, 18 AWG
1			Purple Wire, 22 AWG
2			Green Wire, 18 AWG
1			Black Wire, 18 AWG
1			Black Wire, 22 AWG
1			White Wire, 22 AWG
1			Gray Wire, 22 AWG
1			Resistor, 4.7 Ohm, 5%
2			Resistor, 47 Ohm, 5%
6			Resistor, 220 Ohm, 5%
1			Resistor, 330 Ohm, 5%
2			Resistor, 1k, 5%
2			Resistor, 1.1k, 5%
1			Resistor, 3k, 5%
1			Resistor, 6.8k, 5%
1			Resistor, 22k, 5%
1			Resistor, 47k, 5%
1			Resistor, 10k, 1%, metal film
1			Resistor, 47k, 1%, metal film

Note: The TIP33C and TIP34C have been discontinued and are generally not available anywhere. A wide range of power transistors will work, but they should be rated for at least 100V, 8A, and 80W power dissipation. Safe area operating curves and good thermal dissipation data are rarely available, so it's a guessing game. The more expensive TO-3 package parts, such as the MJ15003 & MJ15004 will certainly be more than sufficient for replacing the TIP33C & TIP34C. The only really compelling reason to use the TIP33C & TIP34C are because they cost less and come in a TO-218 package, which requires only one mounting hole.

Wire

  Diode assembly:         Gray 22 AWG (cathode)
                          White 22 AWG (annode)
  NPN Power Transistor:   Red 18 AWG (collector)
                          Orange 22 AWG (base)
                          Yellow 18 AWG (emitter)
  PNP Power Transistor:   Green 18 AWG (collector)
                          Violet 22 AWG (base)
                          Blue 18 AWG (emitter)
  Input Signal:           No wires, PCB mount jack
  Output Signal:          Blue 18 AWG (from PC board)
                          Black 18 AWG (from power supply)
  PC Board Power:         Red 18 AWG (to +35V on supply)
                          Black 22 Awg (to ground on supply)
                          Green 18 AWG (to -35V on supply)

Vendors

Testing

1. Turn variable resistor fully counterclockwise (max resistance)
2. Connect to +/- 24 volt supply with 200mA current limit. No input and no output connected. Monitor current from power supply with a current meter.
3. Apply power... if current is above about 25 mA, shut off immediately!
4. Measure voltage across the 1k resistor connected to the input stage and Vcc. The DC voltage should be about 2 volt, or 2 mA of current through this resistor. Eg, if Vcc is at 24 volts, the side of this resistor connected to the 2N5210 transisor ought to be at about 22 volts.
5. Measure the DC voltage on the output line. It should be appox zero volts. -0.2 volts is probably fine.
6. Turn the variable resistor slowly until the amplifer's current consumption is approx 50 mA. Turn slowly and be careful... if you turn too far you could damage the output transistors.
7. Conect an oscilloscope to the output and apply a low amplitude 20 kHz square wave to the input. DO NOT connect any speakers during this test. This test should be done without the 330 pF capacitor installed. The amp should output a 20 kHz square wave with very little "ringing". It should not oscillate.
8. Solder the 330 pF capacitor into the circuit.
9. Shut off the power, connect audio input and a speaker. Make sure the volume is turned all the way down. Apply power... watch current meter again and shut off the power immediately if the current jumps to something much higher than 50 mA.
10. Slowly turn up the volume and see if the amp works. DO NOT turn it up very much... the amplifier should not be operated with a supply less than +/- 30 volts. It should never be used for high volume output without a power supply rated for at least 2 amps of current (8 ohm load). After this initial test with +/- 24V at 200 mA (current limited) only a proper power supply should be used which can provide enough current.