| Product | Description |
| EP DRIVE | Oils recommended for use on gears or bearings located into enclosed boxes where difficulties resulting from high load or high impact operation should be solved. |
| CYLINDER | High viscosity refined oils for use on steam machines. Compound grade oils are also used to lubricate endless and ring type reducing mechanisms. |
| BP HYDRAULIC | It is used on hydraulic systems where fluid is pumped by use of pump or blade actuator type equipment or on equipment requiring oils with erosion inhibiting additives. |
| MACHINE | Oil for plant and workshop machines, lathe spindles, and machine tools overall lubrication. |
| Product | Description |
| MO BEARING | Special high-demulsibility oils for rolling cylinder necks or gudgeons. |
| BP HYDRAULIC | It is used on hydraulic systems where fluid is pumped by use of pump or blade actuator type equipment or on equipment requiring oils with erosion inhibiting additives. |
| MACHINE | Oil for plant and workshop machines, lathe spindles, and machine tools overall lubrication. |
| Product | Description |
| TELEMOTOR 7 | Light pure mineral oil with a low freezing point. It is used on marine telemotors and on other hydraulic command units.. |
| BP HYADRAULIC | It is used on hydraulic systems where fluid is pumped by use of pump or blade actuator type equipment or on equipment requiring oils with erosion inhibiting additives. |
| HYDRAULIC | Mineral oils with good viscosity index providing antioxidant, rust-inhibiting, and antifoaming features. They are used on hydraulic systems, hydrodynamic controls of machine tools, drop hammers, hoists, jacks, etc. |
| Product | Description |
| TURBINE R | Highly refined mineral oils which are specially developed for use on steam, gas, water (hydraulic) turbines, turbocompressors, as well as high- and average-speed low charge reducers. |
| TURBINE EP | Oil showing similar characteristics to those in the TURBINA R series but with highest pressure additives. |
| Product | Description |
| Super Móvil Normal | Monograde SAE 20, 30, 40 o 50 is a line of oils produced on highly refined base materials, which are formulated with compounds capable of inhibiting oxidation, corrosion, and erosion. |
| COMPRESSOR 100 | High viscosity oil compounded for improved adhesiveness, which is specially developed for lubricating medium-size, high pressure compressor cylinders involving more than two-stages under room humidity conditions. |
| TURBINE R | Highly refined mineral oils which are specially developed for use on steam, gas, water (hydraulic) turbines, turbocompressors, as well as high- and average-speed low charge reducers. |
| Product | Description |
| REFRIGERATOR | Particularly applicable to lubrication of refrigerating compressor cylinders, cooling equipment for commercial use. |
| Product | Description |
| MOTOGAS | This product has been formulated for lubrication of 2- or 4-cycle stationary, spark ignition, natural gas engines which are applicable to the operation of compressors for a wide range of fluids such as refinery gases, gases from gas pipelines, etc. |
| Product | Description |
| TEXTILE 22 | High refining and stability pure mineral oil for quick motion and very light load antifriction bearings and roller bearings. |
| BP HYDRAULIC | They are used on hydraulic systems where fluid is pumped by use of pump or blade actuator type equipment or on equipment requiring oils with erosion inhibiting additives. |
| Product | Description |
| CYLINDER | High viscosity refined oils for use on steam machines. Compound grade oils are also used to lubricate endless and ring type reducing mechanisms. |
| Product | Description |
| GC TP MILL | This line is characterized by high film adhesiveness and resistance, which enables to support very high loads therefore preventing metal-to-metal contact. |
| GREASE 96/97/98 | These are hot application highly consistent black greases designed to lubricate slow and heavy motion open gears. They are also used to protect cables running in the open air. |
| FLUID ASPHALTICGREASE 650 | This is an asphalt-base, cold application, non-flammable solvent diluted grease. It is used to lubricate low-revolution open gears, cables, furnace chains requiring highly adhesive lubes. |
| Product | Description |
| PNEUMATIC H. | Oils used on Atlas Copco traction engines, tools, and line oil cups. They are also used on Ingersoll Rand air compressor cylinders and air hammers. |
| Product | Description |
| PNEUMATIC H. | Oils used on Atlas Copco traction engines, tools, and line oil cups. They are also used on Ingersoll Rand air compressor cylinders and air hammers. |
| Product | Description |
| TRANSFORMER 64/65 | Insulating oil for transformers, switches, outlet boxes, and for any electrified system in an oil bath. |
| Product | Description |
| EMUSIFIABLE OILS | Lubes forming stable emulsions with water are produced in order to provide highest tool cooling and care. These oils are formulated with the addition of an emulsifier to disperse oil in water. |
| Product | Description |
| TEMPER 51/52 | It provides high cooling rate for hard tempering.Proporciona una alta velocidad de enfriamiento con el objeto de lograr temples duros. |
| Product | Description |
| TURBINE R | Highly refined mineral oils which are specially developed for use on steam, gas, water (hydraulic) turbines, turbocompressors, as well as high- and average-speed low charge reducers. |
| TURBINE EP | They are used mainly on Solar Saturn type gas turbines and on machine tools hydraulic systems. |
| Product | Description |
| RUST-INHIBITOR | This product line is recommended for temporary protection of iron or steel and other metal parts in order to inhibit rust and corrosion. |
| Product | Description |
| Atlanta Marine. Atlanta Marine D. |
This product has been specially formulated to lubricate marine engines crankcases which are lubricated separately (crossarm) and work under highly severe conditions. |
| Aurelia | This product has been specially formulated to lubricate crankcase and cylinders on semirapid marine engines working under severe conditions and operating on Fuel Oil (even with high sulfur content). |
| Aurelia XT | This is a special lube for crankcase and cylinders on modern semirapid engines using residual (high sulfur and asphaltene content or high residual carbon content) fuel. |
| Disola M | This product has been formulated for lubricating crankcase and cylinders on supercharged rapid and semirapid engines operating at high temperatures and using Gas Oil or Diesel Oil as fuel. |
| Talusia XT | It is applied for lubricating slow crossarm Diesel engines, particularly long-stroke high average effective pressure engines operating on fuels the combustion of which results in damaging compounds which should be neutralized by using specially featured lubes. |
| Return to Industrial Lubes |  |
